Monday, September 26, 2011

The "Demon Hunter" Design line

I have agreed to do a trade with Robert, the owner of Rockstonedleather.

He will make me a custom watch (I can't find good commercial ones as my wrist is too thick, almost 10" diameter).


Now Robert loves gothic "hard rock" designs, obviously. So I came up with a Phoenix variation, slightly "Van Helsing'ed".

I just wanted to make a quick and dirty test frame, used some plywood and some leftover olive wood parts as scales. Inked it black, then added some bronze "coffin" nails I had lying around.





It came out really good! I am blown away about how comfortable the frame is.

Have ordered 2000 year old moor oak for the one I am going to make for Robert... it will be even nicer than this one.

24 comments:

  1. Smokin Joerg! cant wait to try it out! Thanks!

    Robert G

    ReplyDelete
  2. Make one and send it to the producers of the Supernatural series. Sam and Dean will never want to use the Colt again, haha.

    ReplyDelete
  3. Real nice Joerg.How does one get to the forum?

    ReplyDelete
  4. Well, that one is really according to my taste, too! How did you stain it? You said "inked". I have some leftover black ink and I am about to make my first boardcut frame from oakwood. Do you think I can achieve this look by staining the oakwood with the black ink?
    P.S. I'll upload pictures of my Sling-X-Bow to your forum as soon as I have repaired the slip-up, I've made when trying to paint it black with lowest-quality paint :)

    ReplyDelete
  5. Preparing for Halloween already? :) Very impressive looking sling-shot Joerg. Amazing what you can produce with a little ink, some nails, some wood and a little rubber.
    Will you be using black rubber bands also?

    ReplyDelete
  6. That is really nice you should still try to make some slingshots with the crocodile leather because those were very nice

    ReplyDelete
  7. That looks great! I assume it'll take flatbands- but it would be cool if you made a "universal" slingshot. Yes, I know about the Dankung Cougar, but I was talking about a more "Sprave" style convertible- you know, gatling .60 that takes both flat and tube.
    Best of Wishes

    ReplyDelete
  8. Ink works very well for staining, it gets soaked up into the wood well. You need to sand and polish (car chrome paste)after the ink is dry. Then the wood grain will show through, some. If you want to see more of the grain, add some water or alcohol to the ink before you apply it.

    Yes, I will use Thera Band Black, no question.

    ReplyDelete
  9. Wow Joerg.. this 1 looks very good, i can't wait to see the "real 1" XD.

    ReplyDelete
  10. looks AWESOME, you should make a vampire/zombie slaying kit.

    ReplyDelete
  11. Yellow :)
    Pretty good ;) Love that uneven coating at the edges.
    The fork is quite thin where the hands meet. Aren’t you afraid that it will snap when you apply stronger bandset (I have never worked with plywood when it comes to slingshots thou)?
    Cheers
    Rafal

    ReplyDelete
  12. porcelanowny, the frame is strong enough for normal bands, but I would not put my strongest bandsets on it. The frame was really only an ergo test, the final frame for Robert will be laminated over the fork arms as well.

    ReplyDelete
  13. No more questions.
    Thank you :)
    Rafal

    ReplyDelete
  14. Maybe you can find some small metal skulls to launch.

    ReplyDelete
  15. WOW! Echt schoen geworden!

    ReplyDelete
  16. this thing like from the 18th century, nice

    ReplyDelete
  17. Awesome!!! You're going to love your watch Joerg..Robert does amazing work "-)

    "Red"

    ReplyDelete
  18. Looks good , and i,m sure that the final one will be fantastic :)

    ReplyDelete
  19. PS you should use silver bands for that one, or atleast silver bullets ;)

    ReplyDelete
  20. Absolutly great...you are a real artist.

    ReplyDelete
  21. That's a real demon! I wish I had a slingshot like that.

    ReplyDelete